Outside Block Work:

Whilst the First Fix Pluming and Electrics are being inside, the outside block work will be getting erected around the timber frame external walls. 

The block layers will lay 4 inch blocks for the outer skin and stick them together with mortar. These blocks then get secured to the timber frame by stainless steel wall ties. The block layers will continue with this the whole way around the property so on the face of it you wouldn’t recognise the property was made from timber frame. 

Rendering:

When this stage is completed, it needs to dry and harden ready for the render. We use machine plastering pre-mixed dry material for the one coat render as we find it the quickest and most cost-effective. This is normally a cement-lime render which is applied at a thickness of about 15mm. The render literally gets blasted out of a machine – it’s applied in one coat to the block work and should achieve a smooth flat surface ready for painting. 

Downpipes & Guttering:

The downpipes and guttering can now be fitted.

Painting:

Once the render has hardened, the house can then be painted. Ideally this should happen when the temperature is quite mild otherwise the paint could crack and flake off. Masonry external paint is used and the first thing that should be done it cutting in. Even though this seems like a long process, it does make it easier for rolling – preparation is key! Normally two coats are required to give an even finish so it’s important to ensure you have enough paint – especially if you’ve created a bespoke colour.

Disclaimer: The information in this website is for general guidance and is not legal advice. Specialist legal advice should be taken in relation to specific circumstances.